Introducing the Fusion VCA-Waveshaper-Ringmodulator
The Fusion VCA-Waveshaper-Ringmodulator is a complex modulation source that combines a VCA, waveshaper and ring modulator. It’s not a regular VCA (it can operate as one), but most of the power of the module is in its advanced modulation capability since it has two CVs that can be applied simultaneously to different stages of the VCA. Using the VCA-Waveshaper-Ringmodulator, your imagination is the only limit!

VCA-Waveshaper-Ringmodulator Features: 

  • Fully analog design
  • Vacuum tube based VCA – two miniature pentodes for better gain reduction
  • Two unconventional CV controls – CVs are not mixed, but they control different grid voltages of the tubes
  • Manual VCA bias control
  • Manual overdrive
  • Input crossfader
  • Built-in ringmodulator
  • Direct switch for conventional VCA mode
  • Low power consumption due to miniature vacuum tubes

The VCA-Waveshaper-Ringmodulator is available from June 5th and will be priced at €290 MSRP (VAT excl.)

Introducing the Fusion VCF3

The Fusion VCF3 meantime is resonant 24dB/oct lowpass filter of unique design that combines vacuum tubes and vactrols for distinct, soft filtering.

 For more versatility, an independent audio mixer and buffered multiple is incorporated in the module, and most importantly, a CV recorder that captures the motion of the potentiometer — enabling you to design advanced modulation patterns.

Fusion VCF3 Features:

  • Fully analogue design
  • Vacuum tube and vactrol based filter circuit. Because of vactrol lag, 
the VCF will not accept audio rate modulation, the maximum 
modulation frequency is 10Hz
  • Input signal mixer with gain 2 for signal overdrive
  • Buffered multiple for splitting audio and CV signals
  • Potentiometer motion record unit with CV and gate outputs
  • Recorded CV multiplication and division

The Fusion VCF3 is available now and priced at €330 MSRP (VAT excl.)

Introducing Fusion Modulator

The new Fusion Modulator is a complex, all analog modulation source with several distinct features. It consists of several blocks: two EMS Synthi functionality inspired looping envelope generators with simultaneous unipolar (0V-10V) and bipolar (-5V-+5V), VCA, noise generator and sample & hold.

 This makes Fusion Modulator a versatile modulation source for advanced modular setups — especially drone music oriented ones. Set looping envelope generators to high frequencies and have two sub bass sound sources; use VCA to control the amplitude of the envelope signal; modulate the decay time by random voltages from S&H circuit to get ever evolving sonic awesomeness!

Fusion Modulator Features:

  • Fully analogue design
  • Two looping envelope generators with Attack, On, Decay and Off time control
  • CV control over Decay time
  • Simultaneous unipolar (0V-10V) and bipolar (-5V – +5V) envelope outputs
  • Manual trigger button
  • End of Cycle output
  • VCA with the offset control
  • Zener diode based white noise source
  • Sample&Hold circuit with internal and external clock source

The Fusion Modulator is available now for €310 MSRP (VAT excl.)

About Erica Synths
Erica Synths team of visionaries, engineers and musicians have been working hard to bring you modules and instruments that will set your modular system apart from mass in terms of how it sounds, looks and functions.

No more articles